Economical replacement bodies for existing permanent heads currently on the market.
The new E-Series was designed for our customers that are using existing permanent heads but would like an alternative to the replacement bodies offered.

The main benefit of the E-Series is price to performance value. E-Series filters, with equal or superior filtration capability, are offered at a considerably lower price than comparable replacement bodies on the market.

Omnipure utilizes several media or media combinations to address standard water problems including granular activated carbon (GAC), polypropylene depth filtration, and polyphosphate. Omnipure also offers one or ten micron carbon blocks, carbon blocks with lead sorbent material and carbon blocks with scale inhibitors to address specific water conditions.

E-Series replacement bodies are offered in 6", 8", 10", 12" and 14" lengths. Bodies are tested to withstand pressure of 125 psi and temperature of 100° F. Media service life is designed to handle up to 3,000 gallons in some models and filtration micron ratings are as low as 1 micron in other models. 

Test Information:
The E-Series filter housing and fittings have been tested for performance under NSF Standard 42. Tests included Hydro Static Testing at 300 psig and Cycle Testing of 100,000 repetitions from 0 to 150 psig. Complete test results are available from Omnipure. Omnipure products have been tested and listed under Standard 42 for taste, odor and chlorine reduction; or particulate reduction; or have been materials certified. All filters should be installed on cold water lines only. 

NOTE: Activated carbon filters are not intended to be used where the water is microbiologically unsafe or with water of unknown quality without adequate disinfection before or after the unit.

Waranty Information:
Omnipure Filter Company (Omnipure) warrants that the products delivered will be free from any defects in workmanship or materials. Further, the warranty provided herein applies, only when used within the products specifications and service life, from the date of installation, beyond which time or use Omnipure is absolved of any and all liability for any use of the product. In the event of defect or non-conformity, buyer shall promptly notify Omnipure in writing, supplying proof of purchase dates, installation dates, and will protect and retain the products for investigation, or Omnipure is absolved of any and all liability for any use of the product. There are no other warranties, either merchantability or fitness, either expressed or implied.